Emmet in Visual Studio Code

Support for Emmet snippets and expansion is built right into Visual Studio Code, no extension required. Emmet 2.0 has support for the majority of the Emmet Actions including expanding Emmet abbreviations and snippets.

How to expand Emmet abbreviations and snippets

Emmet abbreviation and snippet expansions are enabled by default in html, haml, pug, slim, jsx, xml, xsl, css, scss, sass, less and stylus files, as well as any language that inherits from any of the above like handlebars and php.

Emmet in suggestion/auto-completion list

When you start typing an Emmet abbreviation, you will see the abbreviation displayed in the suggestion list. If you have the suggestion documentation fly-out open, you will see a preview of the expansion as you type. If you are in a stylesheet file, the expanded abbreviation shows up in the suggestion list sorted among the other CSS suggestions.

Using Tab for Emmet expansions

If you want to use the Tab key for expanding the Emmet abbreviations, add the following setting:

"emmet.triggerExpansionOnTab": true

This setting allows using the Tab key for indentation when text is not an Emmet abbreviation.

Emmet when quickSuggestions are disabled

If you have disabled the editor.quickSuggestions setting, you won't see suggestions as you type. You can still trigger suggestions manually by pressing Ctrl+Space and see the preview.

Disable Emmet in suggestions

If you don't want to see Emmet abbreviations in suggestions at all, then use the following setting:

"emmet.showExpandedAbbreviation": "never"

You can still use the command Emmet: Expand Abbreviation to expand your abbreviations. You can also bind any keyboard shortcut to the command id editor.emmet.action.expandAbbreviation as well.

Emmet suggestion ordering

To ensure Emmet suggestions are always on top in the suggestion list, add the following settings:

"emmet.showSuggestionsAsSnippets": true,
"editor.snippetSuggestions": "top"

Emmet abbreviations in other file types

To enable the Emmet abbreviation expansion in file types where it is not available by default, use the emmet.includeLanguages setting. Make sure to use language identifiers for both sides of the mapping, with the right side being the language identifier of an Emmet supported language (see the list above).

For example:

"emmet.includeLanguages": {
  "javascript": "javascriptreact",
  "razor": "html",
  "plaintext": "pug"
}

Emmet has no knowledge of these new languages, and so there might be Emmet suggestions showing up in non HTML/CSS contexts. To avoid this, you can use the following setting.

"emmet.showExpandedAbbreviation": "inMarkupAndStylesheetFilesOnly"

Note: If you used emmet.syntaxProfiles previously to map new file types, from VS Code 1.15 onwards you should use the setting emmet.includeLanguages instead. emmet.syntaxProfiles is meant for customizing the final output only.

Emmet with multi-cursors

You can use most of the Emmet actions with multi-cursors as well:

Emmet with multi cursors

Using filters

Filters are special post-processors that modify the expanded abbreviation before it is output to the editor. There are 2 ways to use filters; either globally through the emmet.syntaxProfiles setting or directly in the current abbreviation.

Below is an example of the first approach using the emmet.syntaxProfiles setting to apply the bem filter for all the abbreviations in HTML files:

"emmet.syntaxProfiles": {
  "html": {
    "filters": "bem"
  }
}

To provide a filter for just the current abbreviation, append the filter to your abbreviation. For example, div#page|c will apply the comment filter to the div#page abbreviation.

BEM filter (bem)

If you use the Block Element Modifier (BEM) way of writing HTML, then bem filters are very handy for you to use. To learn more about how to use bem filters, read BEM filter in Emmet.

You can customize this filter by using the bem.elementSeparator and bem.modifierSeparator preferences as documented in Emmet Preferences.

Comment filter (c)

This filter adds comments around important tags. By default, "important tags" are those tags with id and/or class attribute.

For example div>div#page>p.title+p|c will be expanded to:

<div>
    <div id="page">
        <p class="title"></p>
        <!-- /.title -->
        <p></p>
    </div>
    <!-- /#page -->
</div>

You can customize this filter by using the filter.commentTrigger, filter.commentAfter and filter.commentBefore preferences as documented in Emmet Preferences.

The format for the filter.commentAfter preference is different in VS Code Emmet 2.0.

For example, instead of:

"emmet.preferences": {
  "filter.commentAfter": "\n<!-- /<%= attr('id', '#') %><%= attr('class', '.') %> -->"
}

in VS Code, you would use a simpler:

"emmet.preferences": {
  "filter.commentAfter": "\n<!-- /[#ID][.CLASS] -->"
}

Trim filter (t)

This filter is applicable only when providing abbreviations for the Emmet: Wrap with Abbreviation command. It removes line markers from wrapped lines.

Using custom Emmet snippets

Custom Emmet snippets need to be defined in a json file named snippets.json. The emmet.extensionsPath setting should have the path to the directory containing this file.

Below is an example for the contents of this snippets.json file.

{
  "html": {
    "snippets": {
      "ull": "ul>li[id=${1} class=${2}]*2{ Will work with html, pug, haml and slim }",
      "oll": "<ol><li id=${1} class=${2}> Will only work in html </ol>",
      "ran": "{ Wrap plain text in curly braces }"
    }
  },
  "css": {
    "snippets": {
      "cb": "color: black",
      "bsd": "border: 1px solid ${1:red}",
      "ls": "list-style: ${1}"
    }
  }
}

Authoring of Custom Snippets in Emmet 2.0 via the snippets.json file differs from the old way of doing the same in a few ways:

Topic	Old Emmet	Emmet 2.0
Snippets vs Abbreviations	Supports both in 2 separate properties called `snippets` and `abbreviations`	The 2 have been combined into a single property called snippets. See default HTML snippets and CSS snippets
CSS snippet names	Can contain `:`	Do not use `:` when defining snippet names. It is used to separate property name and value when Emmet tries to fuzzy match the given abbreviation to one of the snippets.
CSS snippet values	Can end with `;`	Do not add `;` at end of snippet value. Emmet will add the trailing `;` based on the file type (css/less/scss vs sass/stylus) or the emmet preference set for `css.propertyEnd`, `sass.propertyEnd`, `stylus.propertyEnd`
Cursor location	`${cursor}` or `\|` can be used	Use only textmate syntax like `${1}` for tab stops and cursor locations

HTML Emmet snippets

HTML custom snippets are applicable to all other markup flavors like haml or pug. When snippet value is an abbreviation and not actual HTML, the appropriate transformations can be applied to get the right output as per the language type.

For example, for an unordered list with a list item, if your snippet value is ul>li, you can use the same snippet in html, haml, pug or slim, but if your snippet value is <ul><li></li></ul>, then it will work only in html files.

If you want a snippet for plain text, then surround the text with {}.

CSS Emmet snippets

Values for CSS Emmet snippets should be a complete property name and value pair.

CSS custom snippets are applicable to all other stylesheet flavors like scss, less or sass. Therefore, don't include a trailing ; at the end of the snippet value. Emmet will add it as needed based on whether the language requires it.

Do not use : in the snippet name. : is used to separate property name and value when Emmet tries to fuzzy match the abbreviation to one of the snippets.

Tab stops and cursors in custom snippets

The syntax for tab stops in custom Emmet snippets follows the Textmate snippets syntax.

Use ${1}, ${2} for tab stops and ${1:placeholder} for tab stops with placeholders.
Previously, | or ${cursor} was used to denote the cursor location in the custom Emmet snippet. This is no longer supported. Use ${1} instead.

Emmet configuration

Below are Emmet settings that you can use to customize your Emmet experience in VS Code.

emmet.includeLanguages

Use this setting to add mapping between the language of your choice and one of the Emmet supported languages to enable Emmet in the former using the syntax of the latter. Make sure to use language IDs for both sides of the mapping.

For example:
```
"emmet.includeLanguages": {
  "javascript": "javascriptreact",
  "plaintext": "pug"
}
```
emmet.excludeLanguages

If there is a language where you do not want to see Emmet expansions, add it in this setting which takes an array of language ID strings.
emmet.syntaxProfiles

See Emmet Customization of output profile to learn how you can customize the output of your HTML abbreviations.

For example:
```
"emmet.syntaxProfiles": {
  "html": {
    "attr_quotes": "single"
  },
  "jsx": {
    "self_closing_tag": true
  }
}
```
emmet.variables

Customize variables used by Emmet snippets.

For example:
```
"emmet.variables": {
  "lang": "de",
  "charset": "UTF-16"
}
```

emmet.showExpandedAbbreviation

Controls the Emmet suggestions that show up in the suggestion/completion list.

Setting Value	Description
`never`	Never show Emmet abbreviations in the suggestion list for any language.
`inMarkupAndStylesheetFilesOnly`	Show Emmet suggestions only for languages that are purely markup and stylesheet based ('html', 'pug', 'slim', 'haml', 'xml', 'xsl', 'css', 'scss', 'sass', 'less', 'stylus').
`always`	Show Emmet suggestions in all Emmet supported modes as well as the languages that have a mapping in the `emmet.includeLanguages` setting.

Note: In the always mode, the new Emmet implementation is not context aware. For example, if you are editing a JavaScript React file, you will get Emmet suggestions not only when writing markup but also while writing JavaScript.

emmet.showAbbreviationSuggestions

Shows possible emmet abbreviations as suggestions. It is true by default.

For example, when you type li, you get suggestions for all emmet snippets starting with li like link, link:css , link:favicon etc. This is helpful in learning Emmet snippets that you never knew existed unless you knew the Emmet cheatsheet by heart.

Not applicable in stylesheets or when emmet.showExpandedAbbreviation is set to never.
emmet.extensionsPath

Provide the location of the directory that houses the snippets.json file which in turn has your custom snippets.
emmet.triggerExpansionOnTab

Set this to true to enable expanding Emmet abbreviations with Tab key. We use this setting to provide the appropriate fallback to provide indentation when there is no abbreviation to expand.
emmet.showSuggestionsAsSnippets

If set to true, then Emmet suggestions will be grouped along with other snippets allowing you to order them as per editor.snippetSuggestions setting. Set this to true and editor.snippetSuggestions to top, to ensure that Emmet suggestions always show up on top among other suggestions.
emmet.preferences

You can use this setting to customize Emmet as documented in Emmet Preferences. The below customizations are currently supported:
- css.propertyEnd
- css.valueSeparator
- sass.propertyEnd
- sass.valueSeparator
- stylus.propertyEnd
- stylus.valueSeparator
- css.unitAliases
- css.intUnit
- css.floatUnit
- bem.elementSeparator
- bem.modifierSeparator
- filter.commentBefore
- filter.commentTrigger
- filter.commentAfter
- format.noIndentTags
- format.forceIndentationForTags
- profile.allowCompactBoolean
- css.fuzzySearchMinScore
The format for the filter.commentAfter preference is different and simpler in Emmet 2.0.

For example, instead of the older format
```
"emmet.preferences": {
  "filter.commentAfter": "\n"
}
```
you would use
```
"emmet.preferences": {
  "filter.commentAfter": "\n"
}
```
If you want support for any of the other preferences as documented in Emmet Preferences, please log a feature request.

Next steps

Emmet is just one of the great web developer features in VS Code. Read on to find out about:

HTML - VS Code supports HTML with IntelliSense, closing tags, and formatting.
CSS - We offer rich support for CSS, SCSS and Less.

Troubleshooting

Custom tags do not get expanded in the suggestion list

Custom tags when used in an expression like MyTag>YourTag or MyTag.someclass do show up in the suggestion list. But when these are used on their own like MyTag, they do not appear in the suggestion list. This is designed so to avoid noise in the suggestion list as every word is a potential custom tag.

Add the following setting to enable expanding of Emmet abbreviations using tab which will expand custom tags in all cases.

"emmet.triggerExpansionOnTab": true

My HTML snippets ending with `+` do not work

HTML snippets ending with + like select+ and ul+ from the Emmet cheatsheet are not supported. This is a known issue in Emmet 2.0 Issue: emmetio/html-matcher#1. A workaround is to create your own custom Emmet snippets for such scenarios.

Abbreviations are failing to expand

First, check if you're using custom snippets (if there is a snippets.json file being picked up by the emmet.extensionsPath setting). The format of custom snippets changed in VS Code release 1.53. Instead of using | to indicate where the cursor position is, use tokens such as ${1}, ${2}, etc. instead. The default CSS snippets file from the emmetio/emmet repository shows examples of the new cursor position format.

If abbreviations are still failing to expand:

Check the builtin extensions to see if Emmet has been disabled.
Try restarting the extension host by running the Developer: Restart Extension Host (workbench.action.restartExtensionHost) command in the Command Palette.

Where can I set all the preferences as documented in Emmet preferences?

You can set the preferences using the setting emmet.preferences. Only a subset of the preferences that are documented in Emmet preferences can be customized. Please read the preferences section under Emmet configuration.

Any tips and tricks?

Of course!

In CSS abbreviations, when you use :, the left part is used to fuzzy match with the CSS property name and the right part is used to match with CSS property value. Take full advantage of this by using abbreviations like pos:f, trf:rx, fw:b, etc.
Explore all other Emmet features as documented in Emmet Actions.
Don't hesitate to create your own custom Emmet snippets.

How to expand Emmet abbreviations and snippets​

Using Tab for Emmet expansions​

Emmet when quickSuggestions are disabled​

Disable Emmet in suggestions​

Emmet suggestion ordering​

Emmet abbreviations in other file types​

Emmet with multi-cursors​

Using filters​

BEM filter (bem)​

Comment filter (c)​

Trim filter (t)​

Using custom Emmet snippets​

HTML Emmet snippets​

CSS Emmet snippets​

Tab stops and cursors in custom snippets​

Emmet configuration​

Next steps​

Troubleshooting​

Custom tags do not get expanded in the suggestion list​

My HTML snippets ending with + do not work​

Abbreviations are failing to expand​

Where can I set all the preferences as documented in Emmet preferences?​

Any tips and tricks?​